Study on Evaluating Arithmetic of Network Solving for Product Conceptual Design

产品概念设计是一种复杂的推理求解过程 ,它的设计过程的推理、判断工作量往往非常巨大 .利用“与 /或”树的知识表达方法 ,对产品概念设计过程的原理解答及其组合原理方案评价进行了深入的研究 ,提出了一种分解 /综合网络评价算法 ,为产品概念设计过程的优化以及设计效率的提高打下良好的基础 ,并为进一步开发智能设计的计算机软件支持工具提供了一种形式化的评价方法 .     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

一种新型多模式高速存储器

随着图像采集精度的提高和立体成像的需求,图像数据速率和总量呈几何级数增长,促进了高码率大容量存储的需求。提出一种新的高速存储器方案,通过改变FLASH类型和存储数据处理方式提高数据存储速率,以适应采集图像高精度和高速率的要求。     

一种同轴腔温漂问题的仿真

文章在三维仿真软件HFSS和CST中建立谐振腔模型，给出建模的原理和注意点；详细研究了腔体各尺寸随温度变化对腔体本征频率的影响的正负性及影响大小，得出引起腔体频率变化的主要结构因素；重点分析了调谐螺钉纵向扰动及径向扰动对谐振频率的影响。结合LC谐振电路对结果进行分析，得出减小温漂的措施。并根据仿真结果，对腔体的各个部分合理使用不同材料，使腔体温漂得到补偿。     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

Al/Mg阻抗梯度材料超高速撞击机理数值仿真研究

文章采用数值仿真方法研究了Al/Mg阻抗梯度材料在超高速撞击下的响应过程,分析了冲击波在阻抗梯度材料中的传播规律,计算了撞击过程中的能量耗散情况,并与弹丸撞击铝合金靶的结果进行了比较。研究结果表明,相对于铝合金材料,Al/Mg阻抗梯度材料：1）延长了冲击波的传播时间,使峰值压力脉冲的比冲量提升了30%～50%;2）提高了塑性功和内能转化量,使不可逆功增加了10%。由此证明阻抗梯度材料的防护性能优于铝合金。     

一种高超声速滑翔飞行器轨迹智能预测方法

针对高超声速滑翔飞行器(Hypersonic glide vehicle, HGV)机动性强、轨迹预测困难的问题,选取气动加速度作为预测参数,提出了一种基于集合经验模态分解和注意力长短时记忆网络的HGV轨迹智能预测方法。首先,以HGV六自由度运动方程为基础,分析了其机动特性和气动力变化规律,建立了动力学跟踪模型,对气动加速度进行实时估计;其次,利用集合经验模态分解对估计的气动加速度进行分解和重构,减弱噪声影响,避免对预测模型的干扰;最后,利用去噪后的气动加速度数据对注意力长短时记忆网络进行训练,进而预测未来气动加速度数据并重构HGV未来轨迹,实现轨迹的在线预测。实验仿真表明,该方法能有效预测HGV机动轨迹,预测精度高、稳定性好。     

Optimization of beamforming and path planning for UAV-assisted wireless relay networks

Recently, unmanned aerial vehicles （UAVs） acting as relay platforms have attracted considerable attention due to the advantages of extending coverage and improving connectivity for long-range communications. Specifically, in the scenario where the access point （AP） is mobile, a UAV needs to find an efficient path to guarantee the connectivity of the relay link. Motivated by this fact, this paper proposes an optimal design for beamforming （BF） and UAV path planning. First of all, we study a dual-hop amplify-and-forward （AF） wireless relay network, in which a UAV is used as relay between a mobile AP and a fixed base station （BS）. In the network, both of the AP and the BS are equipped with multiple antennas, whereas the UAV has a single antenna. Then, we obtain the output signal~to-noise ratio （SNR） of the dual-hop relay network. Based on the criterion of maximizing the output SNR, we develop an optimal design to obtain the solution of the optimal BF weight vector and the UAV heading angle. Next, we derive the closed-form outage probability （OP） expression to investigate the performance of the dual-hop relay network conveniently. Finally, computer simulations show that the proposed approach can obtain nearly optimal flying path and OP performance, indicating the effectiveness of the proposed algorithm. Furthermore, we find that increasing the antenna number at the BS or the maximal heading angle can significantly improve the performance of the considered relay network.     

一种宽带阵列通道均衡器设计

从基本FIR均衡器的原理出发,讨论了校正源的设置方法和均衡器系数的计算方法.为了适应宽带阵列中高速信号处理的要求,探讨了一种经典的FIR均衡器时域高速实现方法.该时域实现虽然结构简单,但在滤波器阶数较高时需要大量的乘法资源.为了降低均衡器对乘法资源的需求,借鉴快速卷积的实现方法,提出了一种基于快速傅里叶变换的高速率均衡器实现方法.与时域方法相比,该方法在滤波器阶数大于32时能明显降低对乘法资源的损耗.对实测数据的分析,验证了该方法的正确性.     

数控纤维缠绕机芯模处理软件的研究

给出了离散点输入芯模的数学处理过程，从而对任意给定的芯模轮廓曲线有了统一的处理方法，统了一芯模输入，为非测地线缠绕软件的输入芯模“微元化”提供了理论依据，并为后面的缠绕计算奠定了基础。